TWLY-S Series Stone Removal Feeder

TWLY-S Series automatic feeder with the function of automatical control of feeding speed and impurity removal such as stone and iron.

Highlight Features

Improve the efficiency of hammer mill

Based on the working current of the hammer mill, the feeding to the hammer mill can be actually controlled through a VFD to reach its full load condition quickly and run steadily under this condition.

Friendly operation

A humanized human-computer interface is adopted for the controller, with simple and convenient operation, which significantly reduces the operation difficulty for operations.

Superior performance

A stone removal structure with air classification is employed, which can effectively eliminate impurities such as stone.

The magnetic separator device is used, which can remove the ferrous substance from the material flow to guarantee that the clean material stream is provided for the hammer mill. A long roller with shallow pockets is adopted to reduce the possibility of material jamming in the pocket.

Main structure

1. Material inlet

2. Auxiliary air inlet

3. Machine body

4. Inspection window

5. Adjustment plate for material flow

6. Adjustment plate to block impurities

7. Material outlet

8. Impurity collection box (or auger)

9. Air inlet

10. Ferrous impurity collection box

11. Magnetic gate

12. Feeding roller

13. Feeding gate

Technical parameters

Model	TWLY60S	TWLY80S	TWLY100S	TWLY125S	TWLY150S
Feeding motor power (kW)	1.1	1.5	1.5	2.2	2.2
Screw motor Power (kW)	0.37	0.37	0.55	0.55	0.55
Feeding roller Dia. (mm)	200	200	200	200	200
Maximum speed of feeding roller (r/min)	50	50	50	50	50
Nominal width of feeding room (mm)	600	800	1000	1250	1500